Door hardware sets for Revit

Door hardware, organized inside Revit.

Let dRVT’s AI group every door into hardware sets and draft the hardware. Built-in checks catch the door that doesn’t belong, and set names go straight to your door schedule. No spreadsheets. No retyping.

Plan diagram: every patient room door in one hardware setA hospital corridor with eleven doors. The seven doors that open into patient rooms are in hardware set HW-04, its checks pass, and each door is tagged HW-04. The stair, utility rooms, and nurse station doors are in other sets.SET HW-04 · Patient room✓ Same rating ✓ Hinges ✓ LockingPATIENT201PATIENT202CLEAN UTIL203PATIENT204PATIENT205STAIR206NURSE STN210PATIENT211PATIENT212SOILED UTIL213PATIENT214HW-04HW-04203HW-04HW-04206210HW-04HW-04213HW-04CORRIDORHW-04 · Patient room · 7 of 11 doors
Fig. 1 — One set, seven doors, checked and on the schedule.
01The problem

Nobody edits walls one at a time. Why do it with door hardware?

Walls, rooms, finishes, and equipment all live in the model as connected data. If every one-hour wall changes, the model finds them. Door hardware still runs on spreadsheets, spec books, and markups, with the architect cross-referencing it all by hand.

  1. 01.1

    Sets live outside the model

    Hardware sets tracked in spreadsheets drift out of sync the moment the plan changes.

  2. 01.2

    Every door checked by hand

    Room names, door types, fire ratings, and owner standards cross-referenced one opening at a time.

  3. 01.3

    The wrong question

    Teams ask “which doors do I need to update?” The better question is “what defines this group of doors?”

That’s not a hardware problem. It’s a workflow problem.

02How it works

Group the doors. dRVT checks the set.

  1. Let AI group the doors, or do it yourself

    Suggest with AI groups every door in the model into sets and drafts each set’s hardware for you to review. Or select doors from one list and add them to a set in one move. Either way, the hardware is picked once for the whole set.

  2. dRVT checks they belong together

    Same fire rating, hinges that suit the sizes, locking picked. A door that doesn’t match gets flagged before it reaches the schedule.

    SET   03 Office · 18 doors
    CHECK ✓ Same rating (non-rated)
    CHECK ✓ Hinges suit the door sizes
    CHECK ✓ Locking picked
    WRITE Hardware Set = "03 Office"
  3. Onto the schedule, and into your specs

    dRVT writes the hardware set name to each door, so your door schedule is current without retyping a cell. Then export every set to Word for your firm’s specifications.

The full workflow, and what’s next

03What it does today

What it does now, and what’s next.

Here is exactly what dRVT does today, and what we’re building next. Early users help decide the order.

Available now

  • AI does the first passPro

    Suggest with AI groups every door in the model into hardware sets and drafts each set’s hardware from rooms, ratings, sizes, the project type and your project rules. You review it before anything reaches the model.

  • Checks on every set

    Each set flags the doors that don’t belong: a different fire rating, hinges that don’t suit the size, a glass door missing its closer plate, an electrified opening without power or a fail mode, two sets with the same hardware.

  • Hardware once per set

    Pick the hardware for the set, not door by door, from a catalog that covers electrified, healthcare and sliding hardware. Every door in the set gets it.

  • Straight to your schedule

    Apply to model writes the set to the door parameter your schedule already reads. When the plan changes, Auto-assign puts new doors into the sets they match.

  • Spec-ready export

    Export every set to Word with its doors, quantities, basis of design, acceptable manufacturers and BHMA finishes. Import manufacturers and finishes from an existing spec.

  • Issued versions you can compare

    Issue the hardware for Bid Documents, 100% CD or an addendum, export any issue again, and see what changed since.

  • See the hardware in 3DPro

    Every set’s hardware on its door, in 3D, with a plain description of each part and what it’s for.

  • Your office’s standards, every project

    Write project rules in your own words, and publish sets to a firm library your whole team can reuse.

On the roadmap

  • AI review before you issue

    Ask the AI to read every set against your project rules and flag what looks off, before the drawings go out.

  • Watch for drift

    Flag doors whose rooms, rating or size changed after they were assigned, so a set never quietly stops fitting.

  • Keying

    Group openings into keying groups and export a keying schedule from the same sets.

  • Hand-off to your consultant

    Export the sets in the formats hardware consultants and suppliers work in, as well as Word.

  • Office standards as checks

    Turn your firm’s rules into checks of their own, so every project flags the same things.

Roadmap items are planned, not promised. dRVT supports your judgment and your consultant’s review; it does not certify code compliance.

04From the blog

Notes on hardware, code, and workflow.

All posts
05 · Get dRVT

Stop managing doors one at a time.

dRVT is ready to use. Pick a plan and we’re glad to help your team set up its first sets.

Get dRVT